What F69 Means
Both Miele service documents record F69 as the circulation pump blocked. Something is physically stopping the impeller, so the wash phase cannot run at all — a harder failure than the slow-running pump of F67. It is not an overfill code; the machine reports water where it should not be through the float switch problem, F70.
Common Causes of F69
- Hard debris jammed in the pump impeller
- A label or piece of film wrapped around the impeller
- Impeller seized after a long period of disuse
- Foreign object drawn through from the tub
🔧 One Safe Check You Can Try
Switch the machine off at the socket first, then take out the filter combination and look into the sump with a torch. Glass fragments, olive stones, a peeled-off jar label and small bones are the usual culprits, and anything you can lift out by hand is worth removing before the visit.
⚠ Why You Shouldn't Go Further Than That
- Reaching into the pump housing past the filters is how people cut their hands on the glass that caused the blockage in the first place.
- An impeller that has been forced by repeated restarts can be damaged even after the obstruction is cleared.
- Miele lists this separately from a slow pump and from a pump communication error, and only a proper check confirms which of the three you actually have.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- F69
- Appliance
- Miele dishwasher
- Maker documentation
- Miele owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Miele & Cie. KG.